- 1 -
………………………………………………………………… ENGLISH ……………………………………………………………………
Thank you for choosing Delta DVP-SS2. DVP-SS2 is a 14-point (8DI + 6DO) PLC MPU,
offering various instructions and with 8k steps program memory, able to connect to all
DVP-S series extension models, including digital I/O (max. 480 I/O points) and analog
modules (for A/D, D/A conversion and temperature measurement). 4 groups of
high-speed (10kHz) pulse output satisfy all kinds of applications. DVP-SS2 is small in
size and easy to install.
a This instruction sheet only provides introductory information on electrical
specifications, general specifications, installation and wiring. For detailed information
on programming and instructions, please refer to “DVP-SS2 Operation Manual:
Programming”. For information about optional peripherals, please see individual
product instruction sheet enclosed with DVP-SS2.
a This is an OPEN TYPE device and therefore should be installed in an enclosure free
of airborne dust, humidity, electric shock and vibration. The enclosure should prevent
non-maintenance staff from operating the device (e.g. key or specific tools are
required to open the enclosure) in case danger and damage on the device may
occur.
a DO NOT connect input AC power supply to any of the I/O terminals; otherwise
serious damage may occur. Check all the wiring again before switching on the power.
Make sure the ground terminal is correctly grounded in order to prevent
electromagnetic interference. DO NOT touch any terminals when the power is
switched on.
Product Profile
[ Figure 1 ]
60.00
EXTENSION
PORT
90.00
3.00
3.00
1
2
3
4
5
6
7
8
9
10
11
4
12
13
14
Unit: mm
1. POWER, RUN, ERROR indicator 8. Nameplate
2. RUN/STOP switch 9. Extension port
3. I/O port for program communication (RS-232) 10. DIN rail mounting slot (35mm)
4. DIN rail clip 11. Extension unit clip
5. I/O terminals 12. RS-485 communication port
6. I/O point indicator 13. Mounting rail for extension module
7. Mounting hole for extension module 14. DC power input
Electrical Specifications
Model
Item
DVP14SS211R DVP14SS211T
Power supply voltage
24VDC (-15% ~ 20%)
(with counter-connection protection on the polarity of DC input power)
DVPPS01(PS02): input 100-240VAC, output 24VDC/1A(PS02: 2A)
Inrush current Max. 7.5A@24VDC
To Next Page
Loading...
Need help?
General
