Delta 46-715 User Manual

20
PARTS, SERVICE OR WARRANTY ASSISTANCE
All Delta Machines and accessories are manufactured to high quality standards and are serviced by a network
of Porter-Cable • Delta Factory Service Centers and Delta Authorized Service Stations. To obtain additional
information regarding your Delta quality product or to obtain parts, service, warranty assistance, or the location
of the nearest service outlet, please call 1-800-223-7278 (In Canada call 1-800-463-3582).
SERVICE
2. Use a #5 Allen wrench to remove the three screws (A) Fig. 72. Slide the spindle handle out. Pull the spindle lock to the out
position (see Fig. 24A).
3. Remove the belt (A) Fig. 73 from the pulley (B).
NOTE: When pulling the belt out or replacing the belt, pull the spindle lock handle (B) Fig. 72 out to its fullest position to give more
room (C) Fig. 73 for belt removal or replacement.
4. Replace new belt by using these instructions in reverse order.
C
B
A
A
B
Fig. 73
Fig. 72

Delta 46-715 Specifications

General

Brand	Delta
Model	46-715
Category	Lathe
Language	English