8
ASSEMBLY
ASSEMBLY TOOLS REQUIRED
(Supplied)
* 5mm hex wrench
* 1/2” Blade wrench
(Not supplied)
* Phillips head screw driver
* A square to make adjustments
UNPACKING AND CLEANING
Carefully unpack the machine and all loose items from the shipping container(s). Remove the protective coating from all unpainted
surfaces. This coating may be removed with a soft cloth moistened with kerosene (do not use acetone, gasoline or lacquer thinner for this
purpose). After cleaning, cover the unpainted surfaces with a good quality household floor paste wax.
Fig. 1
Remove the miter saw and all loose items from the carton.
Do not lift the miter saw by the switch handle. This action can cause misalignment. Always lift the machine
by the base or the carrying handle.
1. Miter Saw
2. Dust Bag
3. 1/2" Blade Wrench
4. 5mm Hex Wrench
5. Table Lock Handle
CARTON CONTENTS
2
3
4 5
1
To Next Page
Loading...
Need help?
General
