EasyManuals Logo
Home>Denon>Stereo Receiver>AV SURROUND RECEIVER AVR-788

Denon AV SURROUND RECEIVER AVR-788 User Manual

Denon AV SURROUND RECEIVER AVR-788
74 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #19 background imageLoading...
Page #19 background image

Getting Started Connections Setup Playback Remote Control Multi-Zone Information Troubleshooting
XM
NOTE
Keep the power cord unplugged until the XM Mini-Tuner and Home
Dock connection have been completed.
XM connector
The AVR-788 is an XM Ready
®
receiver. You can receive XM
®
Satellite Radio by connecting to the XM Mini-Tuner and Home Dock
(includes home antenna, sold separately) and subscribing to the XM
service.
Plug the XM Mini-Tuner and Home Dock into the XM connector on
the rear panel.
Position the Home Dock antenna near a south-facing window to
receive the best signal.
For details, see “Listening to XM Satellite Radio Programs” (vpage
43, 44).
When making connections, also refer to the operating instructions of
the XM Mini-Tuner and Home Dock.
XM Mini-Tuner and Home Dock
The XM name and related logo are registered trademarks of XM
Satellite Radio Inc. All rights reserved.
XM Ready is a registered trademark of XM Satellite Radio Inc. All
rights reserved.
Antenna terminals
An F-type FM antenna cable plug can be connected directly.
Direction of broadcasting station
AM loop antenna
(supplied)
FM antenna
75 Ω/ohms
Coaxial cable
FM indoor antenna
(supplied)
GroundAM outdoor antenna
AM loop antenna assembly
Remove the vinyl tie and take
out the connection line.
Connect to the AM
antenna terminals.
Bend in the reverse direction.
a. With the antenna on top of
any stable surface.
Mount
b. With the antenna attached
to a wall.
Installation hole Mount on wall, etc.
Note to CATV system installer:
This reminder is provided to call the CATV system
installers attention to Article 820-40 of the NEC
which provides guidelines for proper grounding and,
in particular, specifies that the cable ground shall be
connected to the grounding system of the building,
as close to the point of cable entry as practical.
Connection of AM antennas
1. Push the
lever.
2. Insert the
conductor.
3. Return the
lever.
NOTE
Do not connect two FM antennas simultaneously.
Even if an external AM antenna is used, do not
disconnect the AM loop antenna.
Make sure the AM loop antenna lead terminals do not
touch metal parts of the panel.
ENGLISH
1.AVR788E3_ENG_108.indd 19 2007/10/05 16:21:44

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Denon AV SURROUND RECEIVER AVR-788 and is the answer not in the manual?

Denon AV SURROUND RECEIVER AVR-788 Specifications

General IconGeneral
BrandDenon
ModelAV SURROUND RECEIVER AVR-788
CategoryStereo Receiver
LanguageEnglish

Related product manuals