28
n Adjusting the volume of the speakers
(vpage28)
n Sleep timer function (vpage29)
n Quick select function (vpage29)
n Various memory functions (vpage29)
Playback (Basic operation) (vpage11)
Selecting a listening mode (Surround mode)
(vpage21)
Playback (Advanced operation)
Convenient functions
Adjusting the volume of the speakers
You can adjust the channel level either according to the playback
sources or to suit your taste, as described below.
nAdjusting the volume of the different speakers
1
Press CH LEVEL.
Channel Level
Front Rear
Front L
Center
Front R
Subwoofer
Surround R
Surround L
Fader
0.0dB
0.0dB
0.0dB
0.0dB
0.0dB
0.0dB
2
Use ui to select the speaker.
The speaker that can be set switches each time one of the
buttons is pressed.
3
Use o p to adjust the volume.
•In the case of a subwoofer, pressing o when it is at “–12 dB” will
change the setting to “OFF”.
•If you do not press any button for approximately 5 seconds, the
menu screen light turns off.
•When a headphone jack is inserted, the headphone channel level
can be adjusted.
nAdjusting the volume of groups of speakers
(Fader function)
This function lets you adjust (fade) the sound all at once from the
front (front speaker / center speaker) or rear (surround speaker /
surround back speaker).
1
Press CH LEVEL.
Channel Level
Front Rear
Front L
Center
Front R
Subwoofer
Surround R
Surround L
Fader
0.0dB
0.0dB
0.0dB
0.0dB
0.0dB
0.0dB
2
Press i to select “Fader”, then select the item to be
adjusting using o p.
Channel Level
Front Rear
Front L
Center
Front R
Subwoofer
Surround R
Surround L
Fader
0.0dB
0.0dB
0.0dB
0.0dB
0.0dB
0.0dB
3
Use o p to adjust the volume of the speakers.
(o : front, p: rear)
•If you do not press any button for approximately 5 seconds, the
menu screen light turns off.
•The fader function does not affect the subwoofer.
•The fader can be adjusted until the volume of the speaker is adjusted
to the lowest value of –12 dB.
To Next Page
Loading...
Need help?
General
