93
Sleep timer function
•This is convenient for viewing and listening while going to sleep in
ZONE2.
•The sleep timer function can be set by zone.
1
Press ZONE2 to switch the zone
mode to the ZONE2.
ZONE2 lights.
2
Press SLEEP and display the time you want to set.
•The time switches as shown below each time SLEEP is pressed.
6080 7090100
110
120
To confirm the countdown time before putting the
unit to sleep
Press SLEEP.
“Z2 Sleep : zmin” appears on the display.
z Countdown time
To cancel the sleep timer
Press SLEEP to set “Off”.
The sleep timer is also cancelled when this unit is set to the standby
mode or the ZONE2 power is turned off.
NOTE
The sleep timer function cannot turn off the power of devices
connected to this unit. To turn of the power of those connected
devices, set up sleep timers on the connected devices themselves.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
