Denon AVR-2312 Service Manual

71
SURROUND MODES AND PARAMETERS
d
Surround
This unit is equipped with a digital signal processing circuit that lets you play program sources in the surround mode to achieve the same sense of presence as in a movie theater. Surround modes and surround parameters This table shows the speakers that can be used in each surround mode and the surround parameters adjustable in each surround mode.
Symbols in the table
S This indicates the audio output channels or surround parameters that can be set. D This indicates the audio output channels. The output channels depend on the settings of “Speaker Config.”.
Surround mode
Channel output Surround Parameters
Front
L/R
Center
Surround
L/R
Surround Back
L/R
Front Height L/R Subwoofer Mode
Cinema EQ.
z6
DRC
z10
D. COMP
z11
LFE
z12
Delay Time Effect Level Room Size
DIRECT/PURE DIRECT (2channel)
z1
S D
z4
S S
DIRECT/PURE DIRECT (Multi-channel)
z1
S D D D
z2
D
z2
D S S S
STEREO
S D S S S
MULTI CH IN
S D D D D
z3
D S
z7
S
DOLBY PRO LOGIC gz S D D D D S
z5
S S S
DOLBY PRO LOGIC gx S D D D D S S
z8
S S
DOLBY PRO LOGIC g S D D D S S
z9
S S
DTS NEO:6
S D D D D S S
z8
S S
DOLBY DIGITAL
S D D D D
z3
D S
z7
S S
DOLBY DIGITAL Plus
S D D D D
z3
D S
z7
S S
DOLBY TrueHD
S D D D D
z3
D S
z7
S S
DTS SURROUND
S D D D D
z3
D S
z7
S S
DTS 96/24
S D D D D
z3
D S
z7
S S
DTS-HD
S D D D D
z3
D S
z7
S S
DTS Express
S D D D D
z3
D S
z7
S S
MULTI CH STEREO
S D D D D
z3
D S S
ROCK ARENA
S D D D D
z3
D S S S S
JAZZ CLUB
S D D D D
z3
D S S S S
MONO MOVIE
S D D D D
z3
D S S S S
VIDEO GAME
S D D D D
z3
D S S S S
MATRIX
S D D D D
z3
D S S S
VIRTUAL
S D S S
z1 During playback in PURE DIRECT mode, the surround parameters are the same as in DIRECT mode. z2 A signal for each channel contained in an input signal is output as audio. z3 If “Surround Parameters” – “PLgz Height” is set to “ON”, sound is output from the front height speakers. z4 Only when “Subwoofer Mode” is set to “LFE+Main”, sound is output from the subwoofer. z5 If this surround mode is selected, only the “Height” mode setting is available for “Surround Parameters” – “Mode”. z6 For HD Audio whose sampling frequency of an input signal is more than 96 kHz, this sound parameter cannot be set. z7 This item cannot be set when “Surround Parameters” – “Surround Back” is set to “PLgx Music”. z8 This item can be selected when “Surround Parameters” – “Mode” is set to “Cinema”. z9 This item can be selected when “Surround Parameters” – “Mode” is set to “Cinema” or “Pro Logic”. z10 This item can be selected when a Dolby TrueHD signal is played. z11 This item can be selected when a Dolby Digital or DTS signal is played. z12 This item can be selected when a Dolby Digital or DTS signal or DVD-Audio is played.

Denon AVR-2312 Specifications

General

Impedance	8 Ω
Speaker selector	A+B
Input sensitivity	200 mV
Pre-out connectivity	Yes
Audio output channels	7.1 channels
Audio A/D Converter (ADC)	24-bit/96kHz
Signal-to-Noise Ratio (SNR)	100 dB
Total Harmonic Distortion (THD)	0.08 %
Power output per channel (1KHz@8 Ohm)	135 W
Power output per channel (20-20KHz@8 Ohm)	105 W
HDMI in	7
Composite video in	4
Ethernet LAN (RJ-45) ports	1
Multichannel audio input type	RCA
Component video (YPbPr/YCbCr) in	2
Headphone connectivity	6.3 mm
Connectivity technology	Wired
Speakers connectivity type	Binding post
Audio formats supported	AAC, FLAC, MP3, WAV, WMA
Image formats supported	JPG
Wi-Fi	No
AM band range	522 - 1611 kHz
FM band range	87.5 - 108 MHz
Supported radio bands	AM, FM
Preset stations quantity	56
Internet radio services supported	Last.fm, Napster
Supported video modes	1080i, 1080p, 480i, 480p, 576i, 576p, 720p
Display	VFD
HDMI version	1.4a
Product color	Black
Audio decoders	Dolby Pro Logic IIz, Dolby TrueHD, DTS-HD Master Audio
Volume control	Rotary
Apple docking compatibility	iPad, iPhone, iPod
Number of products included	1 pc(s)
AC input voltage	230 V
AC input frequency	50 Hz
Power consumption (standby)	0.1 W
Power consumption (typical)	600 W

Weight and Dimensions

Depth	382 mm
Width	434 mm
Height	167 mm
Weight	11000 g