Denon AVR-4310CI User Manual

8
Getting Started Connections Settings Playback Remote Control Information Troubleshooting Specifi cations
The operating procedure is the same for “q Zone Playback by Speaker
Output” and “w Zone Playback by Audio Output (PRE OUT)”.
Playback
1
Turn on the AVR-4310CI’s power.
(vpage 24 “Turning the Power On“)
2
Turn on the zone power.
Operation on the main unit
Press <ZONE2 ON/OFF> or <ZONE3 ON/OFF> for the
zone to be operated.
When the power turns on, the “ ” or “ ” indicator lights
on the display.
Operation on the remote control unit
Press [MAIN] to display the mode for the zone to be
operated, the press [ON].
When the power turns on, the “ ” or “ ” indicator lights
on the display.
Also press [SOURCE SELECT] when in standby mode, the power
turns on.
When using ZONE2 or ZONE3, it is possible to turn the power for
the MAIN ZONE only on or off by pressing [MAIN ZONE ON] or
[MAIN ZONE OFF].
b
b
3
Select the input source.
Operation on the main unit
q Press <ZONE2/3/ REC SELECT> and select the zone to
be adjusted.
w Turn <SOURCE SELECT> to choose the input source.
Operation on the remote control unit
In the zone mode you want to operate, press [SOURCE
SELECT].
The same input source as in the main zone can be selected easily
by pressing the [M.ZONE CALL] on the sub remote control unit.
b
4
Adjust the item below.
Adjust the Volume
Operation on the main unit
q Press <ZONE2/3/ REC SELECT> and select the zone
to be adjusted.
w Turn <VOLUME> to adjust.
Operation on the remote control unit
In the zone mode whose volume you want to adjust,
press [VOLUME].
GAdjustable rangeH
– – – –80dB ~ –40dB ~ 18dB
(When the “Volume Display” setting is “Relative”)
GAdjustable rangeH
0 ~ 41 ~ 99
(When the “Volume Display” setting is “Absolute”)
Upon purchase, “Volume Limit” is set to “-10dB (71)”.
Turning off the Sound Temporarily (MUTE)
In the zone mode for which you want to mute the
sound, press [MUTE].
The sound is reduced to the level set at menu “Mute Level”
(vpage 42).
To cancel, either adjust the volume or press [MUTE] again.
The setting is canceled when the zone’s power is turned off.
n
b
n
b
b
QUICK SELECT
<ON/STANDBY>
<SOURCE SELECT>
<ZONE2/3/ REC SELECT> <MASTER VOLUME>
<ZONE2 ON/OFF> <ZONE3 ON/OFF>
QUICK
SELECT
[SLEEP]
[ZONE OFF]
[ZONE ON]
[MENU]
[VOLUME]
[MUTE]
[SOURCE
SELECT]
[INPUT
SOURCE
SELECT]
[ MAIN]
uio p
Button located on both the main unit
and the remote control unit BUTTON
Button only on the main unit <BUTTON>
Button only on the remote control unit [BUTTON]
Symbols used to indicate buttons in this manual
QUICK
SELECT
[ZONE OFF]
[SLEEP]
[ZONE ON]
[MENU]
[SOURCE
SELECT]
[MUTE]
[VOLUME]
[INPUT
SOURCE
SELECT]
uio p
Multi-zone
1.AVR4310CIEU.indd 87 2009/04/14 16:38:15

Denon AVR-4310CI Specifications

General

Brand	Denon
Model	AVR-4310CI
Category	Receiver
Language	English