Denon AVR-991 User Manual

50
ENGLISH
For speaker impedance and speaker cable connections, see page 4.
Connect
5.1-channel + 2.1-channel connection
If front speakers for 2-channel playback are connected to the SURR. BACK/AMP ASSIGN terminals, both
speakers for multichannel playback and for 2-channel playback can be used, by switching.
In this case, set “Set up “Amp Assign”” (vpage51) to “2CH”.
FLFL FR FR
C
SW
SL
SR
Multi channel playback
(Surround mode)
2-channel playback
(Direct/Stereo mode)
Switching
• For switching multichannel playback and 2-channel playback, see “Selecting a listening mode (Surround
mode)” (vpage43).
• If “2ch Direct/Stereo” – “Setting” (vpage81) is set to “Custom”, settings for 2-channel playback
speakers can be made.
Set up speakers
around items indicate the settings.
1
Set up the
remote control unit
n Set up the zone mode
Press ZONE SELECT to switch the
zone mode to “MAIN”.
The “MAIN” indicator lights.
Press ZONE SELECT
n Set up the operation mode
Press AMP to set the remote control
unit to amplier operation mode.
Press AMP
2
Connect the setup microphone.
[1/6]
STEP1 Preparation
Connect the speakers
and place them accord-
ing to the recommenda-
tions in the manual.
Set the following
items if necessary.
Start Auto Setup
Amp Assign
Channel Select
Auto Setup Start
AUTO SETUP
AUDYSSEY AUTO SETUP
ENTER Enter RETURN Cancel
MultEQ XT
When the setup microphone is
connected, the following screen is
displayed.
Here we describe how to set up speakers other than 5.1-channel speakers.
For the method of setting up 5.1-channel speakers, see “Simple version”, “Set up speakers
(Audyssey
®
Auto Setup)” (vpage6).
First install and connect the speakers to this unit.
Before Auto Setup measurement, the settings shown below can be made.
• Changing the amplifier assignment (Amp Assign)
The signal output from the SURR.BACK/AMP ASSIGN speaker terminal of this unit can be switched to
match your speaker environment (vpage51 “Set up “Amp Assign””).
• Setting the channels to be used (Channel Select)
If channels that are not to be used are set in advance, measurement for the set channels is skipped, and
measuring time can be reduced (vpage51 “Set up “Channel Select””).

Denon AVR-991 Specifications

General

Brand	Denon
Model	AVR-991
Category	Stereo Receiver
Language	English