The removable external antennas are required for both Bluetooth and Wireless network connectivity. Please make sure to connect
the antennas before attempting to use the Bluetooth or Wi-Fi features of the AVR-X2500H.
Connecting the external antennas for Bluetooth / Wireless connectivity
For each of the two antennas:
1. Place the antenna evenly over the antenna terminal located at the upper left or right corner of the rear panel.
2. Turn the antenna clockwise until it is fully connected. Do not over tighten.
3. Rotate the antenna upwards for the best possible reception.
Setup
There are four steps to the setup process.
1. Installing batteries in the remote control unit
2. Connecting the receiver
3. Following the On-Screen Setup Assistant
4. Downloading the Mobile Apps
1 Installing batteries in the remote control unit
2 Connecting the receiver
1) Place the receiver near your TV and connect the power cord TV