Denon AVR-X3100W Model Information

Specifications - Video section, Tuner Section, Wireless LAN Section
HOME
Video section
Color component video connector
Input/output level and impedance
Y signal 1 Vp-p, 75 Ω/ohms
PB/CB signal 0.7 Vp-p, 75 Ω/ohms
PR/CR signal 0.7 Vp-p, 75 Ω/ohms
Frequency response 5 Hz ~ 60 MHz – 0, -3dB
Tuner section
FM AM
Note: µV at 75 Ω/ohms, 0 dBf = 1x10
-15
W
Reception frequency range 87.5 MHz - 107.9 MHz 520 KHz ~ 1710 KHz
Effective sensitivity 1.2 µV (12.8 dBf) 18µV
50 dB sensitivity MONO ― 2.8 μV (20.2 dBf)
S/N ratio
MONO 70 dB (IHF–A weighted, Direct mode)
STEREO 67 dB (IHF–A weighted, Direct mode)
Distortion
Mono 0.7 %
Stereo 1.0 %
Wireless LAN section
Network type (wireless LAN standard)
Conforming to Wi-Fi®*1
(Wi-Fi® compliant)z1
Security
WEP 64 bit, WEP 128 bit
WPA/WPA2-PSK (AES)
WPA/WPA2-PSK (TKIP)
Radio frequency 2.4 GHz
Number of channels 1 - 11ch
*1 The Wi-fi
®
CERTIFIED Logo and the Wi-Fi CERTIFIED On-Product Logo are registered trademarks of the Wi-Fi Alliance.
SPECIFICATIONS - VIDEO –
TUNER – WIRELESS LAN
SPECIFICATIONS -
AUDIO
SPECIFICATIONS -
DIMENSIONS - WEIGHT
SPECIFICATIONS
BLUETOOTH - GENERAL
19

Denon AVR-X3100W Specifications

General

Receiver type	Surround
Speaker selector	A+B
Audio output channels	7.1 channels
Total Harmonic Distortion (THD)	0.08 %
Power output per channel (1KHz@6 Ohm)	180 W
Power output per channel (20-20KHz@8 Ohm)	105 W
HDMI in	8
Remote control in	1
Composite video in	3
Multichannel audio input type	Terminals
Component video (YPbPr/YCbCr) in	2
12V trigger	Yes
Speakers connectivity type	-
Audio formats supported	AAC, AIFF, FLAC, MP3, WAV, WMA
Supported radio bands	FM
Product color	Black
Audio decoders	Dolby Digital EX, Dolby Pro Logic IIx, Dolby Pro Logic IIz, Dolby TrueHD, DTS 96/24, DTS Neo:X, DTS-ES, DTS-HD Master Audio
Volume control	Rotary
Apple docking compatibility	Not supported
Power consumption (standby)	0.1 W
Power consumption (typical)	600 W

Weight and Dimensions

Depth	388 mm
Width	434 mm
Height	167 mm
Weight	10700 g