Denon AVR-X3100W Model Information

 Video connectors (VIDEO)
Used to connect devices equipped with video connectors.
 HDMI connectors
Used to connect devices equipped with HDMI connectors.
 AC inlet (AC IN)
Used to connect the power cord.
 TRIGGER OUT jack
Used to connect devices equipped with the trigger function.
 FM/AM antenna terminals (ANTENNA)
Used to connect FM antennas and AM loop antennas.
 Analog audio connectors (AUDIO)
Used to connect devices equipped with analog audio connectors.
 Speaker terminals (SPEAKERS)
Used to connect speakers.
 PRE OUT connectors
Used to connect a subwoofer with built-in amplifier or power amplifier
for ZONE2.
 Component video connectors (COMPONENT VIDEO)
Used to connect devices equipped with component video connectors.
NOTE
Do not touch the inner pins of the connectors on the rear panel. Electrostatic
discharge may cause permanent damage to the unit.
HOME
Remote Control 1REAR PANEL 1
Rear Panel (2 of 2)
7

Denon AVR-X3100W Specifications

General

Receiver type	Surround
Speaker selector	A+B
Audio output channels	7.1 channels
Total Harmonic Distortion (THD)	0.08 %
Power output per channel (1KHz@6 Ohm)	180 W
Power output per channel (20-20KHz@8 Ohm)	105 W
HDMI in	8
Remote control in	1
Composite video in	3
Multichannel audio input type	Terminals
Component video (YPbPr/YCbCr) in	2
12V trigger	Yes
Speakers connectivity type	-
Audio formats supported	AAC, AIFF, FLAC, MP3, WAV, WMA
Supported radio bands	FM
Product color	Black
Audio decoders	Dolby Digital EX, Dolby Pro Logic IIx, Dolby Pro Logic IIz, Dolby TrueHD, DTS 96/24, DTS Neo:X, DTS-ES, DTS-HD Master Audio
Volume control	Rotary
Apple docking compatibility	Not supported
Power consumption (standby)	0.1 W
Power consumption (typical)	600 W

Weight and Dimensions

Depth	388 mm
Width	434 mm
Height	167 mm
Weight	10700 g