Denon AVR-X4400H User Manual

Menu map
When using menu operations, connect this unit to a TV and operate this unit while viewing the TV.
The recommended settings are configured for this unit by default. You can customize this unit based on your existing system and your preferences.
Setting items Detailed items Description Page
.
Audio
Dialog Level Adjust This setting adjusts the output level to clarify the dialogue output from the center
channel.
171
Subwoofer Level Adjust This setting adjusts the volume level for the subwoofer. 171
Bass Sync Adjusts the phase shift when there is a delay in the bass (LFE) recorded on a disc. 172
Surround Parameter Adjusts surround sound parameters. 172
Restorer Expands the low and high frequency components of compressed audio content such as
MP3 files to enable richer audio playback.
178
Audio Delay Compensates for incorrect timing between video and audio. 179
Volume Sets the MAIN ZONE (room where the unit is located) volume setting. 180
Audyssey
Makes Audyssey MultEQ
®
XT32, Audyssey Dynamic EQ
®
, Audyssey Dynamic
Volume
®
and Audyssey LFC
TM
settings.
181
Graphic EQ Uses the graphic equalizer to adjust the tone of each speaker. 184
.
Video
Picture Adjust Adjusts picture quality. 186
HDMI Setup Makes settings for HDMI Audio Out, HDMI Pass Through and HDMI Control settings. 188
Output Settings Makes settings for video output. 193
Component Video Out Sets whether to use the component video output connector for MAIN ZONE or ZONE2. 196
On Screen Display Configures the on-screen display settings. 197
4K Signal Format Set the 4K signal format when the TV or playback device is 4K compatible. 198
TV Format Sets the video signal format to be output for the TV you are using. 199
Contents Connections Playback Settings Tips Appendix
166
Front panel Display Rear panel Remote Index

Denon AVR-X4400H Specifications

General

Display	-
ECO mode	Yes
HDCP version	2.2
Apple docking	No
Product color	Black
Audio decoders	DTS:X, Dolby Atmos
Audio formats supported	ALAC, DSD, FLAC, WAV
AM band range	522 - 1611 kHz
FM band range	87.5 - 108 MHz
Supported radio bands	AM, FM
Supported graphics resolutions	4096 x 2160
RS-232 ports	1
Connectivity technology	Wireless
HDMI in	8
Composite video in	4
Component video (YPbPr/YCbCr) in	2
Receiver type	Surround
Frequency range	10 - 100000 Hz
Pre-out channels	11.2
Input sensitivity	200 mV
Audio output channels	9.2 channels
Signal-to-Noise Ratio (SNR)	100 dB
Power output per channel (1KHz@6 Ohm)	200 W
Power output per channel (20-20KHz@8 Ohm)	125 W
AC input voltage	230 V
AC input frequency	50 Hz
Power consumption (standby)	0.5 W
Power consumption (typical)	710 W
Number of HDMI outputs	3

Weight and Dimensions

Depth	389 mm
Width	434 mm
Height	167 mm
Weight	13500 g