0
This unit and the PC need to be connected to the network properly in order to use
the web control function.
“Connecting to a home network (LAN)” (v
p. 23)
0
Depending on the settings of your security-related software, you may not be able
to access this unit from your PC. If this is the case, then change the settings of the
security-related software.
Controlling the unit from a web control
1
Switch the “Network Control” setting to “On”.
(v
p. 79)
2
Check the IP address of this unit with “Network
Information”.
(v
p. 79)
.