Power does not turn on / Power is turned off
Power is not turned on.
0
Check whether the power plug is correctly inserted into the power outlet. (v p. 20)
0
This unit is in standby mode. Press the POWER X button on the remote control. (v p. 22)
Power automatically turns off.
0
The auto standby mode setting is on. The auto standby mode automatically switches the unit to standby if there are no operations for more than 15
minutes. To disable the auto standby mode, press and hold the POWER X button on the remote control for more than 5 seconds when the auto
standby mode is enabled. (v p. 33)
When the power is turned on, the power indicator shows one long blink and three short blinks in red.
0
Press the X button on the main unit to turn off the power, and then turn on the power again. If the power indicator blinks again, this unit’s circuit has
failed. Unplug the power cord and contact our customer service center.
Contents
Connections Playback Settings Tips Appendix
37
Front panel Display Rear panel Remote Index
To Next Page
Loading...
