Denon DHT-S316 User Manual

No sound comes out
No sound comes out.
0
Check the connections for all devices. (v
p. 12)
0
Insert connection cables all the way in.
0
Check that input connectors and output connectors are not reversely connected.
0
Check cables for damage.
0
Check that a proper input source is selected. (v p. 20)
0
Adjust the volume. (v
p. 24)
0
Make sure volume is not muted. (v p. 25)
No sound is produced from subwoofer.
0
When there is an obstacle between the sound bar and the subwoofer, remove it or place the subwoofer closer to the sound bar.
0
Make sure the subwoofer status display LED is lit in green. If lights are not lit, it may indicate that the sound bar and subwoofer are not wirelessly
connected. Perform connection again according to the following steps.
A
Press the c button to turn on power to the unit.
B
Press and hold the subwoofer BAR SYNC button for 3 seconds or more.
The subwoofer status display LED blinks once in green.
C
Press and hold the sound bar g and + buttons for 5 seconds or more until the subwoofer status display LEDs blink as indicated below.
The sound bar and subwoofer wirelessly connect. Perform steps A to C again if they do not connect.
Contents Connections Playback Settings Tips Appendix
29

Denon DHT-S316 Specifications

General

Subwoofer included	Yes
Subwoofer connectivity	Wireless
Connectivity technology	Wired & Wireless
Digital audio optical in	1
Bluetooth profiles	A2DP
Audio decoders	DTS, Dolby Digital
Product color	Black
Power consumption (standby)	0.3 W

Weight and Dimensions

Depth	82 mm
Width	900 mm
Height	55 mm
Soundbar weight	1300 g
Subwoofer depth	340 mm
Subwoofer width	170 mm
Subwoofer height	312 mm
Subwoofer weight	5200 g