20
ENGLISH
2
3
Use the
0
and
1
cursor buttons to select the desired setting item.
• Select “VIDEO SETUP” (see page 22, 23).
• Select “AUDIO SETUP” (see page 24, 25).
• Select “DISC SETUP” (see page 26~28).
• Select “SYSTEM SETUP” (see page 29~31).
✽
To exit the setup mode
Press the RETURN or SETUP button.
1
Turn on the power.
• Press the POWER button, the power indicator lights and the power
turns on.
Main unit
2 Make the initial settings to suit your usage conditions before starting playback.
The initial settings are retained until they are next changed, even if the power is turned off.
Remote control unit
In the stop mode, press the SETUP button.
• The setup (default settings) screen appears.
NOTE:
• For some menus, the initial values can be changed during playback.
VIDEO SETUP
Use this to set the DN-V200/DN-V300’s screen mode. (TV aspect and
TV type.)
AUDIO SETUP
Use this to set the DN-V200/DN-V300’s audio output mode.
(Digital and LPCM output settings.)
DISC SETUP
Use this to set the language to be used when playing the disc.
If the set language is not offered on that disc, the discs default language
is set.
SYSTEM SETUP
On-screen display language setting: The initial settings screen’s language
setting, etc., the viewing restriction level and playback of adult DVDs you
do not want children, etc., to see can be restricted. The number of initial
setting items can be increased.
For the display of items marked “ ”, see page
21.
To Next Page
Loading...
Need help?
General
