Denon DNP-730AE User Manual

Troubleshooting
1. Are the connections correct?
2. Is the set being operated as described in the owner’s manual?
3. Are the other devices operating properly?
If this unit does not operate properly, check the items listed in the table below.
Should the problem persist, there may be a malfunction. In this case, disconnect the power immediately and contact your store of purchase.
o
Power does not turn on / Power is turned off
Symptom Cause / Solution Page
Power does not turn on.
0
Check whether the power plug is correctly inserted into the power outlet. 25
Power automatically turns
off.
0
The sleep timer is set. Turn on the power again. 58
0
“Auto-Standby” is set. “Auto-Standby” is triggered when there is no operation for a set amount of time. To
disable “Auto-Standby”, set “Auto-Standby” on the menu to “Off”.
64
o
LED is flashing
Symptom Cause / Solution Page
Flashing red.
0
A circuit in the unit has malfunctioned. Disconnect the power and contact the repair center. －
Contents Connections Playback Settings Tips Appendix
78
Front panel Rear panel Remote control unit Index

Denon DNP-730AE Specifications

General

Power consumption (typical)	18 W
Product color	Silver
Built-in display	Yes
Bluetooth	No
Digital audio optical out	1
Apple docking compatibility	iPhone, iPod
Security algorithms	WPS
Built-in storage media	-
Audio formats supported	AAC, FLAC, MP3, WAV, WMA
Internet radio services supported	vTuner

Weight and Dimensions

Depth	297 mm
Width	434 mm
Height	73 mm
Weight	2900 g