Denon DP-200USB Owner's Manual


ENGLISH
Getting Started Playback Recording and Editing Troubleshooting Specifications
アンプ
1)0/0
- 3
Wait until all connections have been completed before connecting
the power cord.
NOTE
Insert the AC plugs securely. Incomplete connections could cause
noise.
NOTE
• Do not plug in the power cord until all connections have been completed.
• When making connections, also refer to the operating instructions of the other components.
• Be sure to connect the left and right channels properly (left with left, right with right).
• Do not bundle power cords together with connection cables. Doing so can result in humming or noise.
"69
- 3
n
When connecting to an AUX input terminal or an
input terminal other than “PHONO”
n When connecting to a PHONO input terminal
Amplifier
Radio cassette
player / Mini
stereo system
NOTE
Set the equalizer switch to the correct setting for the type of input terminal on the device to which the DP-200USB is being
connected.
For details, refer to “Assembly” (vpage 2).
OFF
ON
Equalizer switch: OFF
OFF
ON
Equalizer switch: ON
To household power outlet
(AC 120 V, 60 Hz)
Connections
Connections
Connecting the Power Cord
Connections

Denon DP-200USB Specifications

General

Type	Belt-drive audio turntable
CD player	No
Product color	Silver
AC adapter frequency	50 Hz
AC adapter input voltage	230 V
Power consumption (typical)	12 W
USB version	2.0
USB ports quantity	1

Weight and Dimensions

Depth	98 mm
Width	360 mm
Height	368 mm
Weight	3200 g