Denon DP-200USB Owner's Manual


ENGLISH
Getting Started Connections Recording and Editing Troubleshooting Specifications
1
Press POWER (
h
ON).
b To turn power off, press POWER again.
2
Open the dust cover and place an analog record on
the rubber mat.
b Use the EP adapter when playing an EP record.
3
Set the record’s playing speed using SPEED.
[Settable Items]
j 33
: 33-1/3 rpm
h 45
: 45 rpm
4
Set the record’s size using SIZE.
[Settable Items]
30
: 0.98 ft / 30 cm
17
: 0.56 ft / 17 cm
5
Raise the stylus cover.
POWER
REC
START
STOP
SIZE
SPEED
NOTE
The DP-200USB cannot play music recorded on a USB flash drive
connected to the player.
The DP-200USB can play analog records.
It also enables you to record your records onto a USB flash drive. For
details on how to record to a USB flash drive, see “Recording and
Editing” (vpage 6).
Press STOP.
Playback stops and the tone arm returns to its original position.
Using the nger lift, move the tone arm to the position at
which you want to start playing and lower it carefully.
b When the record is finished, the tone arm returns to its original
position and the turntable stops automatically. (Auto return
function)
NOTE
•
Be careful not to scratch the record when moving the tone arm.
•
Do not touch the tone arm or turntable or turn off the power while
a record is playing. Doing so can disrupt the sound or damage the
record.
•
The auto start function cannot be used for 0.82 ft / 25 cm records.
Records of this size should be started manually.
•
The auto return function is activated when the tone arm reaches a
specific point near the center of the record. In the case of a non-
standard record with grooves extending beyond this point, the auto
return function may be activated before the record has stopped
playing.
Press START.
The record starts playing automatically.
b When the record is finished, the tone arm returns to its original
position and the turntable stops automatically. (Auto return
function)
b To stop playing a record, turn the POWER “jOFF”.
Preparations
Playback
Preparing to Play a Record
Playing an Analog Record
Auto Start
Manual Start
Stopping a Record During Playback
Playback

Denon DP-200USB Specifications

General

Type	Belt-drive audio turntable
CD player	No
Product color	Silver
AC adapter frequency	50 Hz
AC adapter input voltage	230 V
Power consumption (typical)	12 W
USB version	2.0
USB ports quantity	1

Weight and Dimensions

Depth	98 mm
Width	360 mm
Height	368 mm
Weight	3200 g