Denon HEOS Amp User Manual

Streaming an external audio device to
any HEOS device
The sound from the audio device can be played directly on the selected
device or digitized and sent over your network to other HEOS devices.
1
Connect an external audio device to the digital optical,
analog RCA stereo or analog 3.5mm stereo inputs on
the back of the HEOS Amp.
2
Select “Inputs” from the Music tab.
3
Select the name of the HEOS Amp and which input to
which you connected the audio device in step 1.
4
Initiate playback on the audio device.
NOTE
When a stereo audio cable is connected to AUX IN, the source automatically
switches to Inputs.
.
Audio signal
Contents
Setup Use Troubleshooting Status LED Appendix
23

Denon HEOS Amp Specifications

General

Amplifier class	D
Frequency range	20 - 20000 Hz
Input sensitivity	150 mV
Audio output channels	2.0 channels
Peak power per channel	100 W
Signal-to-Noise Ratio (SNR)	83 dB
Total Harmonic Distortion (THD)	0.1 %
AC (power) in	Yes
Headphone connectivity	3.5 mm
USB 2.0 ports quantity	1
Speakers connectivity type	-
Purpose	Home
Product color	Black, Silver
Cables included	AC, Audio (3.5mm), LAN (RJ-45)
Connectivity technology	Wired & Wireless
AC input voltage	100-240 V
AC input frequency	50 - 60 Hz

Weight and Dimensions

Depth	214 mm
Width	221 mm
Height	93 mm
Weight	2800 g