Denon HEOS Amp User Manual

Advanced Settings
Caution
Adjusting these settings may disconnect your device from your network
and possibly render your device unusable. Do not use these features
unless you are comfortable making advanced adjustments.
o
Network Settings
1
Select “Advanced”.
2
Select “NETWORK SETTINGS” tab.
3
Scroll down to see all of the options for
a. Network Interface (Ethernet or Wireless)
b. Wireless Settings
c. IP Address Settings (Automatic or Manual)
d. Wireless Power Saving
4
Select Save Settings to apply the new settings or
Cancel Changes to revert to the previous settings.
o
About Wireless Power Saving
The Wireless Power Saving feature saves power by turning off power to
the wireless radio inside the HEOS device when the device is connected
to an Ethernet network. If you disconnect the Ethernet cable from the
HEOS device, Wireless Power Saving will automatically turn off and the
wireless radio will turn on so that the HEOS device can be discovered over
your wireless network.
NOTE
If Wireless Power Savings is ON, Wi-Fi power will be temporarily turned on when
accessing the My Devices/(My Devices)/Network screen in the HEOS app or
whenever the Connect button on the device is pressed.
Contents Setup Use Troubleshooting Status LED Appendix
39

Denon HEOS Amp Specifications

General

Amplifier class	D
Frequency range	20 - 20000 Hz
Input sensitivity	150 mV
Audio output channels	2.0 channels
Peak power per channel	100 W
Signal-to-Noise Ratio (SNR)	83 dB
Total Harmonic Distortion (THD)	0.1 %
AC (power) in	Yes
Headphone connectivity	3.5 mm
USB 2.0 ports quantity	1
Speakers connectivity type	-
Purpose	Home
Product color	Black, Silver
Cables included	AC, Audio (3.5mm), LAN (RJ-45)
Connectivity technology	Wired & Wireless
AC input voltage	100-240 V
AC input frequency	50 - 60 Hz

Weight and Dimensions

Depth	214 mm
Width	221 mm
Height	93 mm
Weight	2800 g