3. Reinstall the oil dipstick and make sure it is fully inserted into the guide
tube. Remove the oil dipstick again and read the oil level. Figure below
shows the maximum oil level (1) and minimum oil level (2). If the oil
reading is in the crosshatch area or between the bends of the dipstick, then
the oil is at the proper level for engine operation.
4. If necessary, top off the engine oil by filling no more than 5.0 L (5.2 qt) at a
time. Use only Detroit™ approved oil, Refer to section "Synthetic Oils and
Additives". Do not overfill as overfilling the oil pan can cause engine
damage.
How to Select Lubricating Oil
How to Select Lubricating Oil
Refer to DDC-SVC-BRO-0001 for more information.
Detroit Fluids Specification (DFS) DFS 93K223 (API FA-4) or DFS 93K222
(API CK-4) oils are recommended for use in the engine.
How to Procedures
76 All information subject to change without notice.
Copyright © 2020 DETROIT DIESEL CORPORATION DDC-SVC-MAN-0217
To Next Page
Loading...
Need help?
General
