DeWalt D25899K User Manual

7
English
WARNING: To reduce the risk of injury,
read the instructionmanual.
General Power Tool Safety Warnings
WARNING! Read all safety warnings
and instructions Failure to follow the
warnings and instructions may result in
electric shock, fire and/or seriousinjury.
SAVE ALL WARNINGS AND INSTRUCTIONS
FOR FUTURE REFERENCE
The term “power tool” in the warnings refers
to your mains-operated (corded) power tool or
battery-operated (cordless) powertool.
1) WORK AREA SAFETY
a) Keep work area clean and well lit.
Cluttered or dark areas inviteaccidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power
tools create sparks which may ignite the dust
orfumes.
c) Keep children and bystanders away while
operating a power tool. Distractions can
cause you to losecontrol.
2) ELECTRICAL SAFETY
a) Power tool plugs must match the outlet.
Never modify the plug in any way. Do
not use any adapter plugs with earthed
(grounded) power tools. Unmodified plugs
and matching outlets will reduce risk of
electricshock.
b) Avoid body contact with earthed or
grounded surfaces such as pipes,
radiators, ranges and refrigerators. There
is an increased risk of electric shock if your
body is earthed orgrounded.
c) Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electricshock.
d) Do not abuse the cord. Never use the
cord for carrying, pulling or unplugging
the power tool. Keep cord away from
heat, oil, sharp edges or moving parts.
Damaged or entangled cords increase the
risk of electric shock.
e) When operating a power tool outdoors,
use an extension cord suitable for outdoor
use. Use of a cord suitable for outdoor use
reduces the risk of electric shock.
f) If operating a power tool in a damp
location is unavoidable, use a residual
current device (RCD) protected supply.
Use of an RCD reduces the risk of
electricshock.
avoided, could result in death or
seriousinjury.
CAUTION: Indicates a potentially
hazardous situation which, if not
avoided, may result in minor or
moderateinjury.
NOTICE: Indicates a practice not
related to personal injury which, if
not avoided, may result in property
damage.
Denotes risk of electricshock.
Denotes risk offire.
EC-Declaration of Conformity
MACHINERY DIRECTIVE
OUTDOOR NOISE DIRECTIVE
DEMOLITION HAMMER
D25899, D25941
DeWALT
declares that these products described
under Technical Data are in compliance with:
2006/42/EC, EN60745-1:2009 +A11:2010,
EN60745-2-6:2010;
2000/14/EC, Electrical concrete breaker (hand-held),
m ≤ 15 kg, Annex VIII, TÜV Rheinland LGA Products
GmbH (0197), D-90431 Nürnberg, Germany,
Notified Body ID No.: 0197
Level of sound power according to 2000/14/EC
(Article 12, Annex III, No. 10; m ≤ 15 kg):
L
WA
(measured sound power level)
D25899 dB 100
D25941 dB 102
L
WA
(guaranteed sound power level) dB 105
These products also comply with Directive
2014/30/EU and 2011/65/EU. For more information,
please contact
DeWALT
at the following address or
refer to the back of themanual.
The undersigned is responsible for compilation of
the technical file and makes this declaration on
behalf of
DeWALT
.
Markus Rompel
Director Engineering
DeWALT
, Richard-Klinger-Straße 11,
D-65510, Idstein, Germany
10.07.2018

DeWalt D25899K Specifications

General

Input power	1500 W
Impact energy (max)	17.9 J
Vibration level (chiseling)	12 m/s²
Toolholder	18 mm
Impact rate	2040 bpm
Product color	Black, Yellow

Weight and Dimensions

Depth	127 mm
Width	650 mm
Height	250 mm
Weight	9900 g