EasyManuals Logo
Home>DeWalt>Power Hammer>D25951

DeWalt D25951 Instruction Manual

DeWalt D25951
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
ENGLISH
6
Proper hand position requires one hand on the bail/
loop style auxiliary handle
5
with the other hand on the
mainhandle
2
.
Fig. E
5
2
Switching On and Off (Fig. A)
To turn the tool on, set the on/off switch
1
to position 1. To
turn the tool off, set the on/off switch
1
to position0.
Demolition, Chasing and Channelling
(Fig. A)
WARNING: Ensure that the cutting edge does not
show discoloration caused by too much pressure. This
may impair the hardness of theaccessory.
Various types of chisels are available as anoption.
1. Select the appropriate chisel. Clean and grease itsshank.
2. Insert the chisel and check whether it is properlylocked.
3. Fit and adjust the bail/loop style auxiliary handle
5
and
make sure it is firmlytightened.
4. Hold the tool with both the main handle and the bail/
loop style auxiliary handle and switch on. The tool now
runs in continuousoperation.
5. Always switch off the tool when work is finished and
beforeunplugging.
MAINTENANCE
WARNING: To reduce the risk of serious personal
injury, turn unit off and disconnect it from
power source before making any adjustments or
removing/installing attachments or accessories.
An accidental start‑up can causeinjury.
Lubrication
Your power tool requires no additionallubrication.
Cleaning
WARNING: Blow dirt and dust out of all air vents with
clean, dry air at least once a week. To minimize the risk
of eye injury, always wear ANSI Z87.1 approved eye
protection when performingthis.
WARNING: Never use solvents or other harsh
chemicals for cleaning the non‑metallic parts of
the tool. These chemicals may weaken the plastic
materials used in these parts. Use a cloth dampened
only with water and mild soap. Never let any liquid
get inside the tool; never immerse any part of the tool
into aliquid.
Accessories
WARNING: Since accessories, other than those
offered by
DeWALT
, have not been tested with this
product, use of such accessories with this tool could be
hazardous. To reduce the risk of injury, only
DeWALT
recommended accessories should be used with
thisproduct.
Recommended accessories for use with your tool
are available at extra cost from your local dealer or
authorized service center. If you need assistance in
locating any accessory, please contact
DeWALT
Industrial
Tool Co., 701East Joppa Road, Towson, MD 21286, call
1‑800‑4‑
DeWALT
(1‑800‑433‑9258) or visit our website:
www.dewalt.com.
Repairs
WARNING: To assure product SAFETY and
RELIABILITY, repairs, maintenance and adjustment
(including brush inspection and replacement, when
applicable) should be performed by a
DeWALT
factory
service center or a
DeWALT
authorized service center.
Always use identical replacementparts.
Register Online
Thank you for your purchase. Register your product nowfor:
WARRANTY SERVICE: Registering your product will
help you obtain more efficient warranty service in case
there is a problem with yourproduct.
CONFIRMATION OF OWNERSHIP: In case of
an insurance loss, such as fire, flood or theft, your
registration of ownership will serve as your proof
ofpurchase.
FOR YOUR SAFETY: Registering your product will
allow us to contact you in the unlikely event a safety
notification is required under the Federal Consumer
SafetyAct.
Register online at www.dewalt.com/register.
Three Year Limited Warranty
DeWALT
will repair, without charge, any defects due to
faulty materials or workmanship for three years from
the date of purchase. This warranty does not cover part
failure due to normal wear or tool abuse. For further detail
of warranty coverage and warranty repair information,
visit www.dewalt.com or call 1‑800‑4‑
DeWALT
(1‑800‑
433‑9258). This warranty does not apply to accessories
or damage caused where repairs have been made
or attempted by others. THIS LIMITED WARRANTY IS
GIVEN IN LIEU OF ALL OTHERS, INCLUDING THE IMPLIED
WARRANTY OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, AND EXCLUDES ALL INCIDENTAL
OR CONSEQUENTIAL DAMAGES. Some states do not allow
limitations on how long an implied warranty lasts or the
exclusion or limitation of incidental or consequential
damages, so these limitations may not apply to you. This
warranty gives you specific legal rights and you may have
other rights which vary in certain states orprovinces.

Other manuals for DeWalt D25951

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the DeWalt D25951 and is the answer not in the manual?

DeWalt D25951 Specifications

General IconGeneral
BrandDeWalt
ModelD25951
CategoryPower Hammer
LanguageEnglish

Related product manuals