ENGLISH
7
In addition to the warranty,
tools are covered
byour:
2 YEARS FREE SERVICE
will maintain the tool and replace worn parts
caused by normal use, for free, any time during the first two
years afterpurchase.
90 DAY MONEY BACK GUARANTEE
If you are not completely satisfied with the performance of
your
Power Tool, Laser, or Nailer for any reason, you
can return it within 90 days from the date of purchase with
a receipt for a full refund – no questionsasked.
LATIN AMERICA: This warranty does not apply to products
sold in Latin America. For products sold in Latin America,
see country specific warranty information contained in
the packaging, call the local company or see website for
warrantyinformation.
FREE WARNING LABEL REPLACEMENT: If your warning
labels become illegible or are missing, call 1‑800‑4‑
(1‑800‑433‑9258) for a freereplacement.
TROUBLESHOOTING GUIDE
BE SURE TO FOLLOW SAFETY RULES AND INSTRUCTIONS
For assistance with your product, visit our website at www.dewalt.com for a list of service centers, or call
(1‑800‑433‑9258).
PROBLEM POSSIBLE CAUSE SOLUTION
Tool will not start. The extension cord and/or plug is defective. Have the extension cord and/or plug checked by a qualified
electrician and replaced if necessary.
Internal componets too hot. Allow tool to cool down.
Brushes worn out. Have brushes replaced by an authorized D
WALT service center.
Reduced Power. The extension cord is too long and/or its gauge
is inadequate.
Use an extension cord of an approved length and/or of
adequate gauge.
The voltage provided by the electric supply
is inadequate.
Connect the hammer to an adequate electric supply.
The chisel cannot be released. The chuck is not pulled back fully. Pull the chuck back as far as it will go and remove the chisel. Refer
to Inserting and Removing SDS MAX Chisels.
To Next Page
Loading...
Need help?
General
