DeWalt DCB1102MDR User Manual

5
ENGLISH
Markings on Battery Charger
The following pictograms are shown on the tool:
Read instruction manual beforeuse.
Do not charge damaged batterypacks.
Do not expose to water.
Have defective cords replacedimmediately.
Charge only between 4˚C and 40˚C.
Only for indooruse.
Package Contents
The package contains:
1 Battery charger
1 Instruction manual
NOTE: Battery packs, chargers and kitboxes are not included with Nmodels.
• Check for damage to the tool, parts or accessories which may have occurred
duringtransport.
• Take the time to thoroughly read and understand this manual prior tooperation.
Electrical Safety
The charger has been designed for one voltage only. Make sure that the voltage of your
charger corresponds to that of yourmains.
i
Your DeWALT charger is double insulated in accordance with EN60335;
therefore, no earth wire isrequired.
If the supply cord is damaged, it must be replaced only by DeWALT or an authorised
serviceorganisation.

DeWalt DCB1102MDR Specifications

General

Brand	DeWalt
Model	DCB1102MDR
Category	Battery Charger
Language	English