EasyManuals Logo
Home>DeWalt>Power Tool>DCC018

DeWalt DCC018 User Manual

DeWalt DCC018
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #13 background imageLoading...
Page #13 background image
11
ENGLISH
Using the Inflator as a Pressure Gauge
CAUTION: Verify the pressure with a suitable pressure
gauge; for example, at your filling station.
1. Connect the high-volume hose
10
to the item to
bechecked.
2. Press the power switch
2
.
3. The pressure gauge display
9
will display the
item'spressure.
MAINTENANCE
Your DeWALT inflator has been designed to operate over a long
period of time with a minimum of maintenance. Continuous
satisfactory operation depends upon proper tool care and
regularcleaning.
WARNING: To reduce the risk of serious personal
injury, turn tool off and disconnect battery pack
or external power supply before making any
adjustments or removing/installing attachments or
accessories. An accidental start-up can causeinjury.
Repairs
The charger, battery pack and external power supply are
notserviceable. If the inflator will not turn on, check the
battery, all connections, and the fuse in the 12V DC vehicle
connector
19
. The inflator display will show an error code
under certain conditions. Refer to the Troubleshooting Error
Codeschart.
Storage Recommendations
Store the inflator indoors. The best storage place is one that is
cool and dry, away from direct sunlight and excess heat orcold.
Cleaning
WARNING: Blow dirt and dust out of the main housing
with dry air as often as dirt is seen collecting in and around
the air vents. Wear approved eye protection and approved
dust mask when performing thisprocedure.
WARNING: Never use solvents or other harsh chemicals
for cleaning the non-metallic parts of the tool. These
chemicals may weaken the materials used in these parts.
Use a cloth dampened only with water and mild soap.
Never let any liquid get inside the tool; never immerse any
part of the tool into aliquid.
Optional Accessories
WARNING: Since accessories, other than those offered
by DeWALT, have not been tested with this product, use
of such accessories with this tool could be hazardous.
To reduce the risk of injury, only DeWALT recommended
accessories should be used with thisproduct.
Consult your dealer for further information on the
appropriateaccessories.
Protecting the Environment
Separate collection. Products and batteries marked
with this symbol must not be disposed of with normal
householdwaste.
Products and batteries contain materials that can
be recovered or recycled reducing the demand for raw
materials. Please recycle electrical products and batteries
according to local provisions. Further information is available at
www.2helpU.com.
Rechargeable Battery Pack
This long life battery pack must be recharged when it fails
to produce sufficient power on jobs which were easily done
before. At the end of its technical life, discard it with due care for
our environment:
Run the battery pack down completely, then remove it from
thetool.
Li-Ion cells are recyclable. Take them to your dealer or a
local recycling station. The collected battery packs will be
recycled or disposed ofproperly.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the DeWalt DCC018 and is the answer not in the manual?

DeWalt DCC018 Specifications

General IconGeneral
BrandDeWalt
ModelDCC018
CategoryPower Tool
LanguageEnglish

Related product manuals