DeWalt DCG413N User Manual

4
ENGLISH
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or when
it is running but not actually doing the job. This may significantly
reduce the exposure level over the total workingperiod.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of workpatterns.

CAUTION: Working with the wire brush or the abrasive
cutting can lead to different vibration levels.

WARNING : Grinding thin sheets of metal or other easily
vibrating structures with a large surface can result in a total noise
emission much higher (up to 15 dB) than the declared noise
emission values. Such workpieces should as far as possible be
prevented from emitting sound by suitable measures such as the
application of heavy flexible damping mats. The increased noise
emission is also to be considered for both the risk assessment of
noise exposure and selecting adequate hearing protection.
EC-Declaration of Conformity
Machinery Directive
Cordless Small Angle Grinder
DCG406, DCG413
DeWALT declares that these products described under
Technical Data are in compliance with:
2006/42/EC, EN62841‑1:2015 +A11:2022, EN IEC 62841‑2‑
3:2021 +A11:2021.
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact DeWALT at
the following address or refer to the back of themanual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf ofDeWALT.
Markus Rompel
Director Engineering
DeWALT, Richard‑Klinger‑Strasse 11,
65510, Idstein, Germany
13.12.2023
DECLARATION OF CONFORMITY
THE SUPPLY OF MACHINERY SAFETY REGULATIONS
2008
Cordless Small Angle Grinder
DCG406, DCG413
DeWALT declares that these products described under
“technical data” are in compliancewith:
The Supply of Machinery (Safety) Regulations, 2008, S.I.
2008/1597 (as amended),
Congratulations!
You have chosen a DeWALT tool. Years of experience, thorough
product development and innovation make DeWALT one of the
most reliable partners for professional power toolusers.
Technical Data
DCG406 DCG413
Voltage V
DC
18 18
Type 2 1
Battery type Li-Ion Li-Ion
Power output W 800 800
No-load speed
min
-1
9000 9000
Grinding wheel diameter mm 125 115
Grinding wheel thickness (max) mm 6.4 6.4
Cutting off wheel diameter
mm 125 115
Cutting off wheel thickness (max)
mm 3 3
Wire wheel diameter
mm 115 115
Wire wheel thickness (max)
mm 13 13
Spindle diameter
M14 M14
Spindle length
mm 21.5 21.5
Weight (without battery pack)* kg 1.74 1.72
* weight includes side handle and guard
Noise values and vibration values (triax vector sum) according
to EN62841-2-3:
L
PA
(emission sound pressure level) dB(A) 85 85
L
WA
(sound power level) dB(A) 93 93
K (uncertainty for the given sound
level)
dB(A) 3 3
Surface grinding
Vibration emission value a
h,AG
= m/s
2
4.8 4.8
Uncertainty K = m/s
2
1.5 1.5
Disc sanding
Vibration emission value a
h,DS
= m/s
2
<2.5 <2.5
Uncertainty K = m/s
2
1.5 1.5
Concrete grinding and cutting off
Vibration emission value a
h,CG
= m/s
2
4.1 4.1
Uncertainty K = m/s
2
1.5 1.5
The vibration emission level given in this information sheet has
been measured in accordance with a standardised test given in
EN62841 and may be used to compare one tool with another. It
may be used for a preliminary assessment ofexposure.

WARNING: The declared vibration emission level represents
the main applications of the tool. However if the tool is
used for different applications, with different accessories or
poorly maintained, the vibration emission may differ. This
may significantly increase the exposure level over the total
workingperiod.
English (original instructions)
CORDLESS SMALL ANGLE GRINDER
DCG406, DCG413

DeWalt DCG413N Specifications

General

Brand	DeWalt
Model	DCG413N
Category	Grinder
Language	English