27
ENGLISH
An estimation of the level of exposure to vibration should
also take into account the times when the tool is switched
off or when it is running but not actually doing the job.
This may significantly reduce the exposure level over the
total workingperiod.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool
and the accessories, keep the hands warm, organisation
of workpatterns.
EC-Declaration of Conformity
Machinery Directive
Heavy-Duty Cordless Rotary Hammer
DCH033, DCH133
declares that these products described under
Technical Data are in compliance with:
2006/42/EC, EN60745-1:2009+A11:2010, EN60745-2-6:2010.
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact
at
the following address or refer to the back of themanual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of
.
Markus Rompel
Director Engineering
, Richard-Klinger-Straße 11,
D-65510, Idstein, Germany
04.10.2016
WARNING: To reduce the risk of injury, read the
instruction manual.
Definitions: Safety Guidelines
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
thesesymbols.
DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
seriousinjury.
WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or
seriousinjury.
CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or
moderateinjury.
NOTICE: Indicates a practice not related to
personal injury which, if not avoided, may result in
propertydamage.
Denotes risk of electricshock.
Denotes risk offire.
General Power Tool Safety Warnings
WARNING: Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
seriousinjury.
SAVE ALL WARNINGS AND INSTRUCTIONS
FOR FUTURE REFERENCE
The term “power tool” in the warnings refers to your mains-
operated (corded) power tool or battery-operated (cordless)
powertool.
Batteries
Chargers/Charge Times (Minutes)
Cat #
DC
Weight
Batteries Chargers/Charge Times (Minutes)
Cat # V
DC
Ah
Weight
kg
DCB107 DCB113 DCB115 DCB118 DCB132 DCB119 DCB413
DCB546 18/54 6.0/2.0 1.05 270 140 90 60 90 X X
DCB547 18/54 9.0/3.0 1.25 420 220 140 85 140 X X
DCB497 36 7.5 1.92 X X X X X X 150
DCB496 36 6.0 1.88 X X X X X X 120
DCB181 18 1.5 0.35 70 35 22 22 22 45 X
DCB182 18 4.0 0.61 185 100 60 60 60 120 X
DCB183/B 18 2.0 0.40 90 50 30 30 30 60 X
DCB184/B 18 5.0 0.62 240 120 75 75 75 150 X
DCB185 18 1.3 0.35 60 30 22 22 22 X X
DCB141 14.4 1.5 0.30 70 35 22 X 22 45 X
DCB142 14.4 4.0 0.54 185 100 60 X 60 120 X
DCB143 14.4 2.0 0.30 90 50 30 X 30 60 X
DCB144 14.4 5.0 0.52 240 120 75 X 75 150 X
DCB145 14.4 1.3 0.30 60 30 22 X 22 X X
To Next Page
General
