13
English
TROUBLESHOOTING
Problem Solution
Unit will not start. • Check battery installation.
• Check battery charging requirements.
• Check that lock off is fully pushed
down prior to moving main trigger.
Battery won’t charge. • Insert battery into charger until red
charging light illuminates. Charge up
to 8 hours if battery is totally drained.
•
Plug charger into a working outlet. Refer
to
Important Charging Notes
for
more details.
• Check current at receptacle by
plugging an appliance.
• Check to see if receptacle is
connected to a light switch which
turns power off when you turn out the
lights.
• Move charger and appliance to a
surrounding air temperature of above
40°F (4.5°C) or below 105°F
(40.5°C).
Slow running, noisy,
or hot blades.
• Inspect for nicks and remove if possible.
• Lubricate blades.
• Bring to a D
eWALT factory service
center to straighten blade, blade
support, or teeth.
• Tighten bolts on the blade.
To Next Page
Loading...
Need help?
General
