DeWalt DWE7485 User Manual

11
ENGLISH
Unpacking
• Remove the saw from the packaging materialcarefully.
• The machine is fully assembled except for the rip fence,
mitre gauge, dust adapter and blade guardassembly.
• Finalise the assembly following the instructions as
describedbelow.
Mounting the Saw Blade (Fig. A, B)

WARNING: To reduce the risk of serious personal
injury, turn tool off and disconnect tool from power
source before making any adjustments or removing/
installing attachments or accessories. An accidental
start-up can causeinjury.

WARNING: To reduce the risk of injury, wear gloves when
handling the sawblade.

WARNING: The teeth of a new blade are very sharp and
can bedangerous.

WARNING: The saw blade MUST be replaced as described
in this section. ONLY use saw blades as specified under
Technical Data. We suggest DT99565. NEVER fit other
sawblades.
NOTE: This tool has blade installed fromfactory.
ASSEMBLY AND ADJUSTMENTS

WARNING: To reduce the risk of serious personal
injury, turn tool off and disconnect tool from power
source before making any adjustments or removing/
installing attachments or accessories. An accidental
start-up can causeinjury.
Description (Fig. A, C)

WARNING: Never modify the power tool or any part of it.
Damage or personal injury couldresult.
1
Table
2
Blade
3
Rip scale indicator
4
Fine adjust knob
5
Rail lock lever
6
Blade height adjustment
wheel
7
Bevel lock lever
8
ON/OFF assembly
9
Mounting holes
10
Mitre gauge
11
Blade guard assembly
12
Carry handle
13
Dust collection port
14
Guard dust collection port
15
Throat plate
Date Code Position (Fig. A)
The date code
25
, which also includes the year of manufacture,
is printed into thehousing.
Example:
2019 XX XX
Year of Manufacture
Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual beforeuse.
Wear earprotection.
Wear eyeprotection.
Wear facemask.
Keep hands away from cutting area and theblade.
Carryingpoint.
Package Contents
The package contains:
1 Partly assembled machine
1 Rip fence assembly
1 Mitre fence
1 Saw blade
1 Upper blade guard assembly
1 Throat plate
2 Blade wrenches
1 Dust extraction adapter
1 Instruction manual
• Check for damage to the tool, parts or accessories which may
have occurred duringtransport.
• Take the time to thoroughly read and understand this manual
prior tooperation.
16
Rip fence
17
Rip fence latch
18
Narrow ripping fence/
support extension
19
Blade wrenches (stored
position)
20
Push stick (stored position)
21
Riving knife (non-through
sawing) (Fig.C)
22
Mitre gauge storage
23
Cable holder
24
DE7400 brackets mounting
holes
Intended Use
Your table saw has been designed for professional ripping,
cross-cutting, mitreing and bevelling with various materials as
wood analogous materials andplastic.
DO NOT use under wet conditions or in the presence of
flammable liquids orgases.
This table saw is a professional powertool.
DO NOT let children come into contact with the tool.
Supervision is required when inexperienced operators use
thistool.
• Young children and the infirm. This appliance is not
intended for use by young children or infirm persons
without supervision.
• This product is not intended for use by persons (including
children) suffering from diminished physical, sensory or
mental abilities; lack of experience, knowledge or skills
unless they are supervised by a person responsible for their
safety. Children should never be left alone with thisproduct.

DeWalt DWE7485 Specifications

General

Push stick	Yes
Idle speed	5800 RPM
Cutting depth (45º)	45 mm
Cutting depth (90º)	65 mm
Cutting width @ parallel guide/rip fence (max)	622 mm
Product color	Black, Grey, Yellow
Input power	- W
Output power	1850 W

Weight and Dimensions

Width	605 mm
Height	330 mm
Weight	22000 g
Table width	485 mm
Spindle bore	30 mm
Blade diameter	210 mm