DeWalt DWE8100T User Manual

11
English
To avoid build-up of metal swarf inside the machine, we
recommend to clear the ventilation slots on a daily basis. Refer
to Maintenance.
Using Flap Discs
WARNING: Metal dust build-up. Extensive use
of flap discs in metal applications can result in the
increased potential for electric shock. To reduce
this risk, insert an RCD before use and clean the
ventilation slots daily by blowing dry compressed
air into the ventilation slots inaccordance with the
below maintenance instructions.
MAINTENANCE
Your DeWALT power tool has been designed to operate
over a long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon proper tool
care and regularcleaning.
WARNING: To reduce the risk of serious
personal injury, turn tool off and disconnect
tool from power source before making
any adjustments or removing/installing
attachments or accessories. Before
reconnecting the tool, depress and release the
trigger switch to ensure that the tool is off.
Pop-off Brushes
The motor will be automatically shut off indicating that the
carbon brushes are nearly worn out and that the tool needs
servicing. The carbon brushes are not user-serviceable. Take the
tool to an authorised DeWALT repair agent.
Lubrication
Your power tool requires no additionallubrication.
Cleaning
WARNING: Blow dirt and dust out of the main
housing with dry air as often as dirt is seen
collecting in and around the air vents. Wear
approved eye protection and approved dust mask
when performing thisprocedure.
WARNING: Never use solvents or other harsh
chemicals for cleaning the non-metallic parts
of the tool. These chemicals may weaken
the materials used in these parts. Use a cloth
dampened only with water and mild soap. Never
let any liquid get inside the tool; never immerse
any part of the tool into aliquid.
Optional Accessories
WARNING: Since accessories, other than those
offered by DeWALT, have not been tested with
this product, use of such accessories with this tool
could be hazardous. To reduce the risk of injury,
only DeWALT recommended accessories should be
used with thisproduct.
Consult your dealer for further information on the
appropriateaccessories.
Protecting the Environment
Separate collection. Products and batteries marked
with this symbol must not be disposed of with
normal household waste.
Should you find one day that your DeWALT product needs
replacement, or if it is of no further use to you, do not dispose
of it with household waste. Make this product available for
separate collection.
Separate collection of used products and
packaging allows materials to be recycled and
used again. Re-use of recycled materials helps
prevent environmental pollution and reduces the
demand for raw materials.
Local regulations may provide for separate collection of
electrical products from the household, at municipal waste sites
or by the retailer when you purchase a new product.
DeWALT provides a facility for the collection and recycling of
DeWALT products once they have reached the end of their
working life. To take advantage of this service please return your
product to any authorised repair agent who will collect them on
our behalf.
You can check the location of your nearest authorised repair
agent by contacting your local DeWALT office at the address
indicated in this manual. Alternatively, a list of authorised
DeWALT repair agents and full details of our after-sales service
and contacts are available on the Internet at: www.2helpU.com.

DeWalt DWE8100T Specifications

General

Brand	DeWalt
Model	DWE8100T
Category	Grinder
Language	English