ENGLISH
8
Description (fi g. 1)
WARNING: Never modify the power
tool or any part of it. Damage or
personal injury could result.
a. Speed control wheel
b. Variable speed trigger switch
c. Brush inspection cap
d. Spindle lock button
e. Auxiliary handle
f. Trigger locking button
g. Bale handle
h. Spindle
i. Soft rubber gear case cover
j. Wool ingestion shield
k. Date code
INTENDED USE
Your DWP849X heavy-duty polisher has been
designed for polishing painted or unfinished metal,
fiberglass, and composite surfaces in professional
applications. Common examples of use include
but are not limited to: auto/marine/RV/motorcycle
detailing and finish correction, boat construction and
repair, and metal or concrete finishing.
DO NOT use under wet conditions or in presence of
flammable liquids or gases.
These heavy-duty polishers are professional power
tools. DO NOT let children come into contact with
the tool. Supervision is required when inexperienced
operators use this tool.
• This product is not intended for use by persons
(including children) suffering from diminished
physical, sensory or mental abilities; lack of
experience, knowledge or skills unless they are
supervised by a person responsible for their
safety. Children should never be left alone with
this product.
Electrical Safety
The electric motor has been designed for one
voltage only. Always check that the power supply
corresponds to the voltage on the rating plate.
Your DEWALT tool is double insulated in
accordance with EN 60745; therefore no
earth wire is required.
WARNING: 120 V units have to
be operated via a fail-safe isolating
transformer with an earth screen
between the primary and secondary
winding.
If the supply cord is damaged, it must be replaced
by a specially prepared cord available through the
DEWALT service organisation.
Mains Plug Replacement
(Middle East and Africa)
If a new mains plug needs to be fitted:
• Safely dispose of the old plug.
• Connect the brown lead to the live terminal in
the plug.
• Connect the blue lead to the neutral terminal.
WARNING: No connection is to be
made to the earth terminal.
Follow the fitting instructions supplied with good
quality plugs. Recommended fuse: 13 A.
Using an Extension Cable
If an extension cable is required, use an approved
extension cable suitable for the power input of this
tool (see Technical Data). The minimum conductor
size is 1.5 mm
2
; the maximum length is 30 m.
When using a cable reel, always unwind the cable
completely.
ASSEMBLY AND ADJUSTMENTS
WARNING: To reduce the risk of
injury, turn unit off and disconnect
machine from power source before
installing and removing accessories,
before adjusting or changing set-
ups or when making repairs. Before
reconnecting the tool, depress and
release the trigger switch to ensure
that the tool is off.
Auxiliary Handle (fi g. 1)
WARNING: Before using the tool,
check that the handle is tightened
securely.
An auxiliary handle (e) is supplied with your tool and
can be installed on either side of the gear case.
This handle should be used at all times to maintain
complete control of the tool.
A bale handle (g) is also supplied with the DWP849X
and can be used in place of the auxiliary handle.
Wool Ingestion Shields (fi g. 1, 2)
The wool ingestion shields (j) are designed to reduce
the amount of wool, dust, and debris that gets
ingested by the motor during normal use.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
