4
ENGLISH
Markus Rompel
Director Engineering
, Richard-Klinger-Straße 11,
D-65510, Idstein, Germany
20.04.2016
WARNING: To reduce the risk of injury, read the
instruction manual.
Definitions: Safety Guidelines
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
thesesymbols.
EC-Declaration of Conformity
Machinery Directive
Heavy-Duty Construction Dust Extractor
DWV902L, DWV902M, DWV902MT
declares that these products described under
Technical Data are in compliance with:
2006/42/EC, EN60335-1:2012 +A11:2014 EN60335-2-69:2012.
These products also comply with Directive, 2014/30/EU and
2011/65/EU. For more information, please contact
at
the following address or refer to the back of themanual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of
English (original instructions)
HEAVY-DUTY CONSTRUCTION DUST EXTRACTOR
DWV902L, DWV902M, DWV902MT
Congratulations!
You have chosen a
tool. Years of experience, thorough product development and innovation make
one of the
most reliable partners for professional power toolusers.
Technical Data
DWV902L QS/GB DWV902L LX DWV902M/ DWV902MT
QS/GB
DWV902M/ DWV902MT
LX
Voltage V
AC
230 – 230 –
UK & Ireland V
AC
230 115 230 115
Type 2 2 2 2
Rated power W 1400 1400 1400 1400
Max power W 3600/3000 1840 3600/3000 1840
Power, normal operation (EN 60335-2-69) W 1200 1065 1200 1065
Frequency Hz 50 50 50 50
Protective class IPX4 IPX4 IPX4 IPX4
Container capacity I 38 38 38 38
Filling quantity (liquid) I 18.4 18.4 18.4 18.4
Flow rate (max at blower) l/s 68 64 68 64
Negative pressure (max at blower) kPa 21 20 21 20
Flow rate (EN 60335-2-69) l/s 32.6 31.3 32.6 31.3
Negative pressure (EN 60335-2-69) kPa 18.6 16.8 18.6 16.8
Filter surface m² 0.3 0.3 0.3 0.3
Power connection data of power tool W 2200/1600 440 2200/1600 440
Hose length m 4.1 4.1 4.1 4.1
Hose diameter mm 32 32 32 32
Weight kg 15 15 15 15
Noise values and vibration values (triax vector sum) according to EN60335-2-69:
L
PA
(emission sound pressure level) dB(A) 75 75 75 75
L
WA
(sound power level) dB(A) 88 88 88 88
K (uncertainty for the given sound level) dB(A) 3 3 3 3