DeWalt XR DCB118 User Manual

12
ENGLISH
Charging a Battery
NOTE: To ensure maximum performance and life of lithium‑ion battery packs, charge the
battery pack fully before firstuse.
1. Plug the charger into an appropriate outlet before inserting batterypack.
2. Insert the battery pack
1
into the charger, making sure the battery pack is fully seated
in the charger. The red Stage 1Charging blink indicator light will blink repeatedly
indicating that the charging process hasstarted.
3. The Stage 1Charging blink indicator represents the charge process that charges the
majority of the battery's capacity. Stage2Charging blink indicator represents the
remainder, or top off charge process, for the battery to reach fullcapacity.
4. The completion of charge for Stage 1or Stage 2will be indicated by the Stage's light
remaining ON continuously. The battery pack is fully charged when both Stage 1and
Stage 2charging lights remain ON continuously, and it may be removed and used at
this time or left in thecharger.
NOTE: To remove the battery pack, some chargers require the battery pack release button
to bepressed.
Description (Fig.A)

WARNING: Never modify the power tool or any part of it. Damage or personal injury
couldresult.
1
Battery
2
Battery release button
3
Charger
Intended Use
The DCB118 charger is designed for charging 18V DeWALT Li‑Ion XR and XR FLEXVOLT
battery packs: DCB181, DCB182, DCB183, DCB183B, DCB183G, DCB184, DCB184B,
DCB184G, DCB185, DCB187, DCB189, DCB546, DCB547, DCB548.
DO NOT use under wet conditions or in the presence of flammable liquids orgases.
These battery chargers and battery packs are professional powertools.

DeWalt XR DCB118 Specifications

General

Brand	DeWalt
Model	XR DCB118
Category	Battery Charger
Language	English