DeWalt XR DCD100 User Manual

ENGLISH
3
English (original instructions)
18V MAX* COMPACT 13 MM DRILL/DRIVER/HAMMER DRILL
DCD100, DCD100Y
Congratulations!
You have chosen a DeWALT tool. Years of experience, thorough
product development and innovation make DeWALT one of the
most reliable partners for professional power toolusers.
Technical Data
noise emission may differ. This may significantly increase the
exposure level over the total workingperiod.
An estimation of the level of exposure to vibration and/or
noise should also take into account the times when the tool is
switched off or when it is running but not actually doing the
job. This may significantly reduce the exposure level over the
total workingperiod.
Identify additional safety measures to protect the operator
from the effects of vibration and/or noise such as: maintain
the tool and the accessories, keep the hands warm (relevant
for vibration), organisation of workpatterns.
EC-Declaration of Conformity
Machinery Directive
Drill/Driver/HammerDrill
DCD100, DCD100Y
DeWALT declares that these products described under
Technical Data are in compliance with:
2006/42/EC, EN62841-1:2015 +AC:2015 +A11:2022, EN 62841-
2-1:2018 + A11:2019 + A12:2022 + A1:2022.
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact DeWALT at
the following address or refer to the back of themanual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf ofDeWALT.
Markus Rompel
Vice-President Engineering, PTE-Europe
DeWALT, Richard-Klinger-Straße 11,
65510, Idstein, Germany
15.09.2023
DCD100, DCD100Y
Voltage V
DC
18
Type 1
Battery type Li-Ion
No load speed Drill, Driver/Hammer
1st gear min
-1
0–450
2nd gear 0–1650
Impact rate
1st gear min
-1
0–7650
2nd gear 0–28050
Max. torque (hard/soft)
hard Nm 68
soft Nm 26
Chuck capacity mm 1.5–13
Maximum drilling capacity
Wood mm 30
Metal 13
Masonry 13
Weight (without battery pack) kg 1.15
Noise values and vibration values (triax vector sum) according to EN62841-2-1:
L
PA
(emission sound pressure level) dB(A) 89
L
WA
(sound power level) dB(A) 97
K (uncertainty for the given sound
level)
dB(A) 3
Drilling into metal
Vibration emission value a
h,D
= m/s
2
<2.5
Uncertainty K = m/s
2
1.5
Impact drilling
Vibration emission value a
h,ID
= m/s
2
12
Uncertainty K = m/s
2
1.5
The vibration and/or noise emission level given in this information
sheet has been measured in accordance with a standardised test
given in EN 62841 and may be used to compare one tool with
another. It may be used for a preliminary assessment ofexposure.

WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However,
if the tool is used for different applications, with different
accessories or is poorly maintained, the vibration and/or
DECLARATION OF CONFORMITY
THE SUPPLY OF MACHINERY SAFETY
REGULATIONS 2008
DRILL/DRIVER/HAMMERDRILL
DCD100, DCD100Y
DeWALT declares that these products described under
Technical Data are in compliancewith:
The Supply of Machinery (Safety) Regulations, 2008, S.I.
2008/1597 (as amended),
EN62841-1:2015+AC:2015+A11:2022, EN 62841-2-1:2018 +
A11:2019 + A12:2022 + A1:2022.

DeWalt XR DCD100 Specifications

General

Brand	DeWalt
Model	XR DCD100
Category	Drill
Language	English