EasyManuals Logo
Home>DeWalt>Power Screwdriver>XR DCD716

DeWalt XR DCD716 User Manual

DeWalt XR DCD716
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
ENGLISH
3
EC-Declaration of Conformity
Machinery Directive
Drill/Driver/Impact Drill
DCD716
DeWALT declares that these products described under
Technical Data are in compliance with:
2006/42/EC, EN62841-1:2015+AC:2015, EN62841-2-
1:2018+A11:2019.
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact DeWALT at
the following address or refer to the back of themanual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf ofDeWALT.
Markus Rompel
Vice-President Engineering, PTE-Europe
DeWALT, Richard-Klinger-Straße 11,
65510, Idstein, Germany
04.10.2021
The vibration and/or noise emission level given in this information
sheet has been measured in accordance with a standardised test
given in EN62841
and may be used to compare one tool with
another. It may be used for a preliminary assessment ofexposure.
WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However
if the tool is used for different applications, with different
accessories or poorly maintained, the vibration and/or
noise emission may differ. This may significantly increase
the exposure level over the total workingperiod.
An estimation of the level of exposure to vibration and/or
noise should also take into account the times when the tool
is switched off or when it is running but not actually doing
the job. This may significantly reduce the exposure level
over the total workingperiod.
Identify additional safety measures to protect the operator
from the effects of vibration and/or noise such as: maintain
the tool and the accessories, keep the hands warm
(relevant for vibration), organisation of workpatterns.
DCD716
Voltage
Peak V
DC
12
Rated V
DC
10.8
Type 1
Battery type Li-Ion
No-load speed:
1st gear min
-1
0–400
2nd gear min
-1
0–1500
Impact rate
1st gear min
-1
0-6000
2nd gear min
-1
0-22500
Max torque (hard/soft) Nm 30/16
Power output (MWO) W 180
Chuck capacity mm 10
Maximum drilling capacity:
Wood mm 20
Metal mm 10
Masonry mm 8
Weight (without battery pack) kg 0.98
Noise values and/or vibration values (triax vector sum) according to
EN62841-2-1:
L
PA
(emission sound pressure level) dB(A) 85.5
L
WA
(sound power level) dB(A) 96.5
K (uncertainty for the given sound level) dB(A) 3
Drilling into metal
Vibration emission value a
h,D
= m/s
2
<2.5
Uncertainty K = m/s
2
1.5
Impact drilling
Vibration emission value a
h,ID
= m/s
2
10.1
Uncertainty K = m/s
2
1.5
Congratulations!
You have chosen a DeWALT tool. Years of experience, thorough
product development and innovation make DeWALT one of the
most reliable partners for professional power toolusers.
Technical Data
English (original instructions)
12 V CORDLESS ADJUSTABLE CLUTCH DRILL/DRIVER/
HAMMERDRILL
DCD716

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the DeWalt XR DCD716 and is the answer not in the manual?

DeWalt XR DCD716 Specifications

General IconGeneral
BrandDeWalt
ModelXR DCD716
CategoryPower Screwdriver
LanguageEnglish

Related product manuals