DeWalt XR DCS356 User Manual

12
ENGLISH
ASSEMBLY AND ADJUSTMENTS

WARNING: To reduce the risk of serious personal
injury, turn tool off and disconnect battery pack
before making any adjustments or removing/
installing attachments or accessories. An accidental
start-up can causeinjury.

WARNING: Use only DeWALT battery packs andchargers.
Description (Fig.A)

WARNING: Never modify the power tool or any part of it.
Damage or personal injury couldresult.
1
Variable speed trigger
2
LED Worklight
3
Accessory clamp lever
4
Lock on/off button
5
Accessory side mount slots
6
Cut guide block
7
Cut guide arm
8
Battery pack
9
Battery release button
10
Speed selector (DCS356)
Intended Use
This oscillating multi‑tool is designed for professional detail
sanding, plunge cutting, flush cutting, removal of excess
materials and surface preparationapplications.
DO NOT use under wet conditions or in the presence of
flammable liquids orgases.
This oscillating multi‑tool is a professional powertool.
DO NOT let children come into contact with the tool.
Supervision is required when inexperienced operators use
thistool.
• Young children and the infirm. This appliance is not
intended for use by
• This product is not intended for use by persons (including
children) suffering from diminished physical, sensory or
mental abilities; lack of experience, knowledge or skills
unless they are supervised by a person responsible for their
safety. Children should never be left alone with thisproduct.
Date Code Position (Fig. B)
The date code
25
, which also includes the year of manufacture,
is printed into thehousing.
Example:
2021 XX XX
Year of Manufacture
Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual before use.
Wear ear protection.
Package Contents
The package contains:
1 Adaptor for all blades
1 31mm x 43mm Fastcut wood blade
1 Sanding‑pad
1 31mm x 43mm Wood with nails blade
1 Rigid scraper blade**
1 Blade adaptor and hex key
1 Dust extraction adaptor**
1 Cutting guide**
1 100mm Semicircle blade**
25 Assorted sandpaper pieces
1 9.5mm x 43mm Wood detail blade**
1 3mm Carbide grout removal blade (100mm half moon)**
1 Cutting guide hex key**
1 Charger
1 TSTAK kitbox
1 Li‑Ion battery pack (C1, D1, E1, L1, M1, P1, S1, T1, X1, Y1
models)
2 Li‑Ion battery packs (C2, D2, E2, L2, M2, P2, S2, T2, X2, Y2
models)
3 Li‑Ion battery packs (C3, D3, E3, L3, M3, P3, S3, T3, X3, Y3
models)
1 Instruction manual
** Accessory included only with NT models and kits containing
battery andcharger.
NOTE: Battery packs, chargers and kitboxes are not included
with N models. Battery packs and chargers are not included with
NT models. Bmodels include Bluetooth® batterypacks.
NOTE: The Bluetooth® word mark and logos are registered
trademarks owned by the Bluetooth®, SIG, Inc. and any use of
such marks by DeWALT is under license. Other trademarks and
trade names are those of their respectiveowners.
• Check for damage to the tool, parts or accessories which may
have occurred duringtransport.
• Take the time to thoroughly read and understand this manual
prior tooperation.
Battery Type
The following tools operate on a 18 volt battery pack:
DCS355, DCS356.
These battery packs may be used: DCB181, DCB182, DCB183,
DCB183B, DCB183G, DCB184, DCB184B, DCB184G, DCB185,
DCB187, DCB189, DCB546, DCB547, DCB548, DCB549. Refer to
Technical Data for moreinformation.
Wear eye protection.
Visible radiation. Do not stare into light.

DeWalt XR DCS356 Specifications

General

Brand	DeWalt
Model	XR DCS356
Category	Power Tool
Language	English