AnywhereUSB User Manual (90001085_F1) 13
Interpreting the Status LEDs
The AnywhereUSB/5 has six LEDs on the front panel: one System Status
LED and five hub LEDs. Each LED is capable of displaying three colors:
red, green, or orange.
System Status LED
On initial power up the System Status LED is orange for two seconds
while the system initializes and then blinks green. If DHCP is enabled and
the unit is booting up, the System Status LED will be orange while the
AnywhereUSB searches for a DHCP server. If it cannot find a DHCP
server, it will return to the default configuration to allow the Configuration
Utility to assign a static IP address.
USB Port LEDs
Green hunting pattern across all 5 USB
Port LEDs
Not connected to a host PC.
Orange alternating on ports 1-3-5 and
2-4
Updating image in Flash. Do not remove
power from AnywhereUSB while flash is
being updated. Doing so will damage your
AnywhereUSB.
Green over Red hunting pattern
Please call customer service.