AnywhereUSB Installation Guide (90000405 Rev. F) – Page 5
4. When you have completed adding the subnet address to the Discovery List, click on the
Close button to save the list. The screen will refresh within a few seconds.
5. Select a Concentrator and press the Connect button to add the Concentrator’s IP address to
the Connection List. The host computer then attempts to connect to the Concentrator. For a
list of the Concentrators to which you are currently configured to connect, select
Connection List from the Edit menu.
6. The Found New Hardware Wizard prompts you to search for the drivers: one time for the
Remote Hub and two times each for the USB Host Controllers and the USB Root Hubs.
Select the Install software automatically (Recommended) option and click the Next
button. If you get the warning message indicating that the drivers have not yet passed
Windows Logo Testing, click the Continue Anyway button.
To Next Page
Loading...
Need help?
General
