Digi Connect ME Hardware Reference Manual

Programming considerations Memory
Digi Connect ME, Wi-ME, ME 9210, Wi-ME 9210 Hardware Reference Manual
39
Note 1: This measurement was taken from the R6 current sense resistor using a 0.025 ohm shunt on
the JumpStart Kit development board.
Note 2: This is the default power consumption mode when entering applicationStart(), as measured
with the napsave sample application. The value of the NS9210 Clock Configuration register
(A090017C) is 0001200B hexadecimal.
Note 3: This measurement was produced by selecting the “Clock Scale” menu option in the napsave
sample application.
Note 4: This measurement was produced by selecting the “Deep Sleep/Wakeup with an External IRA”
menu option in the napsave sample application.

Digi Connect ME Specifications

General

Power Supply	3.3 VDC
Ethernet Ports	1
Serial Ports	1
Network Interface	10/100Base-T Ethernet
Serial Interface	RS-232/485
Operating Temperature	-40°C to 85°C
Product Type	Embedded Device Server
Protocols	TCP/IP, UDP, HTTP, FTP, SMTP, DHCP, DNS, SNMP, Telnet