Regulatory information Industry Canada
Digi Connect ME, Wi-ME, ME 9210, Wi-ME 9210 Hardware Reference Manual
67
Industry Canada
This digital apparatus does not exceed the Class B limits for radio noise emissions from digital
apparatus set out in the Radio Interference Regulations of the Canadian Department of
Communications.
Le present appareil numerique n'emet pas de bruits radioelectriques depassant les limites applicables
aux appareils numeriques de la class B prescrites dans le Reglement sur le brouillage radioelectrique
edicte par le ministere des Communications du Canada.
Europe
The Digi Connect ME, Wi-ME, ME 9210, Wi-ME 9210 is certified for use in several European countries.
For information, visit www.digi.com/resources/certifications.
If the Digi Connect ME, Wi-ME, ME 9210, Wi-ME 9210 is incorporated into a product, the manufacturer
must ensure compliance of the final product with articles 3.1a and 3.1b of the RE Directive (Radio
Equipment Directive). A Declaration of Conformity must be issued for each of these standards and
kept on file as described in the RE Directive (Radio Equipment Directive).
Furthermore, the manufacturer must maintain a copy of the Digi Connect ME, Wi-ME, ME 9210, Wi-ME
9210 user manual documentation and ensure the final product does not exceed the specified power
ratings, antenna specifications, and/or installation requirements as specified in the user manual. If
any of these specifications are exceeded in the final product, a submission must be made to a notified
body for compliance testing to all required standards.
OEM labeling requirements
The 'CE' marking must be affixed to a visible location on the OEM product.
CE labeling requirements
The CE mark shall consist of the initials “CE” taking the following form:
n If the CE marking is reduced or enlarged, the proportions given in the above graduated
drawing must be respected.
n The CE marking must have a height of at least 5mm except where this is not possible on
To Next Page
Loading...
Need help?
General
