Digi ConnectPort LTS 16 User Manual

Configure the device using the ConnectPort LTS web interface Applications pages
Digi ConnectPort LTS User Guide
116
Configure advanced PPP settings
To enable or disable Proxy ARP:
1. Select Application > PPP.
2. Click Advance PPPConnections.
3. Select or clear the Process ARP Requests (Proxy ARP) check box to enable or disable Proxy
ARP.
4. Click Apply to save your changes.
Configure settings on serial ports
To configure the settings on serial ports:
1. Select a port from Configuration > Serial ports > Ports Settings.
2. Click Change Profile and change the port profile to modem.
3. In the Port Profile Settings > Modem Settings section, select Incoming Connections.
4. Select Enable PPP connections on this modem if you want to establish a PPP connection.
5. Set configurations on Basic Serial Settings and Advanced Serial Settings sections according
to your environment.
6. Select the authentication method of the serial port in the Authentication Settings section. If
the port profile is set to modem, you can only select None or Local authentication method.
7. Select PPP User from the list if you set authentication method to None.
If you select the Local authentication method, you cannot select a PPP user separately. To
make the correct PPP connection with the Local serial port authentication method, you need
to have the PPP connection configuration with the same user name and password as in the
local system user database set on Configuration > Users. (See Configure incoming PPP
connections.)
Note If your serial port or internal modem uses local authentication with a user in the local
database, you must use the Show Terminal window on your PPP client. When the terminal
window opens, log in to the serial port and then close the terminal window. PPP negotiation
will start once you close the terminal window.
Python Configuration
If you have a Python-enabled ConnectPort LTS device, you can manage Python files using the
Application > Python menu options. Python options include:
n Uploading Python program files to the ConnectPort LTS device
n Deleting a Python program file from the device
n Configuring which Python programs to execute when the ConnectPort LTS device boots (also
known as auto-start programs)

Digi ConnectPort LTS 16 Specifications

General

Brand	Digi
Model	ConnectPort LTS 16
Category	Server
Language	English