Digi ConnectPort LTS 16 User Manual

Configure and manage the device using the ConnectPort LTS
command line interface
Management through the command line
interface
Digi ConnectPort LTS User Guide
137
set alarm
Use the set alarm command to display alarm settings, including conditions that trigger alarms, and
how alarms are sent. You can configure alarms to be sent as either an email message, an SNMP trap,
or both. You can configure the alarms as needed.
set autoconnect
Use the set autoconnect command to configure the autoconnection behaviors for serial port
connections.
set buffer and display buffers
Use the set buffer command to configure buffering parameters on a port and display the current port
buffer configuration. The display buffers command displays the contents of a port buffer, or
transfers the port-buffer contents to a server running Trivial File Transfer Protocol (TFTP).
set group
Use the set group command to configure create, establish, update, or remove group attributes.
set host
Use the set host command to configure the host name for the Digi device.
set ippool
Use the IPpool command to configure the IP pool for the PPP connection.
set lcd
Use the set lcd command to configure the LCD.
set modem
Use the set modem command to configure the modem profile.
set network
Use the set network command to configure the network options.
set nfs
Use the set nfs command to configure NFS.
set permissions
Use the set permissions command to configure the user permissions for various services and
command-line interface commands.

Digi ConnectPort LTS 16 Specifications

General

Brand	Digi
Model	ConnectPort LTS 16
Category	Server
Language	English