Digi PortServer TS 8 User Manual

17-10 Checking for Duplicate IP Addresses
Checking for Duplicate IP Addresses
Use this procedure to ensure that the PortServer TS 8/16 and another device are not using the same
IP address.
Procedure
1. From another system on the network, use the ping command to determine if the IP address is in
use. The following is the command syntax:
ping ip-address
2. Do one of the following:
• If there is no response to the ping, exit this procedure and return to the symptoms section of
this section. Two devices using the same IP address is probably not a problem.
• If there is a response, continue with this procedure.
3. Turn the PortServer TS 8/16 off and then ping again.
4. Do one of the following:
• If there is a response to the ping, there is another device using that IP address, so assign one
of the devices a new IP address.
• If there is no response, turn the PortServer TS 8/16. Another device is not using the IP
address assigned PortServer TS 8/16.

Digi PortServer TS 8 Specifications

General

Brand	Digi
Model	PortServer TS 8
Category	Server
Language	English