Box Contents:
1 x Wireless Headphones
1.x 3.5mm AUX Cable
1 x USB Charging Cable
1 x 6.5mm Adaptor
1 x 3.5mm Mono Airplane Adaptor
1 x Carry Case
Operating Instructions:
Adjusting the Headband:
• In order to achieve maximum comfort and noise cancellation, the headband should be
adjusted to properly fit your head with the ear cups sitting comfortably over your ears.
Charging the Headphones:
Prior to use, charge your headphone unit by connecting the included charging cable into a
USB power outlet (such as USB chargers or computer USB ports) and plug the other end into
the headphone’s micro USB charging port. The LED indicator will light up Red showing that
the unit is being charged. When charging is complete, the Red LED indicator will turn off.
Active Noise Cancelling Mode:
• Adjust the volume on the headphones.
• To power ON the noise cancelling function, set the ON/OFF switch to ON. The Noise
Cancelling LED indicator will light up in Blue.
Note: After you turn ON the power, you might hear a slight hissing noise. This is a normal
function and will cease after a few seconds.
• When the batteries are running low, the Noise Cancelling LED indicator will become dim.
• Once the battery is fully drained, the active noise cancelling feature will turn off but the
audio signal from the music player will continue to transmit.
• In quiet environments where noise cancellation is not required, the headphones can also
be used like conventional headphones, without the use of batteries.
• When not in use, switch OFF the POWER to extend battery life.
To Next Page
Loading...
Need help?
General
