3.2 Multi Point Connection
A. Follow 3.1 to connect with the first device, double press MFB to enter into pairing mode again with Blue LED
flash.
B. Turn on the Bluetooth function of the second device (Bluetooth headphone, speaker or receiver etc) to enter
into pairing mode. Place the AA2112 and your device close and wait in 5-30 seconds for connection. AA2112 solid
Green LED after connected with two devices.
Notes:
* Pls turn off AA2112 and turn on again, and try to reconnect or repair with two devices, when it could not connected
with two devices at the first time.
* Multi point connection could compatible with most of the chipset solution at the market, except less of them.
* Single connection priority support aptX™ low latency (connected device also support aptX™ low latency). Two
connections priority support aptX™ low latency (connected devices also support aptX™ low latency). Two
connections priority support aptX™ (connected devices also support aptX™). Two connections turn to SBC
automatically if the CODEC are different.
3.3 TV Connection
Connect AA2112 and the TV with 3.5mm audio cable or fibre optic cable, and Bluetooth connect AA2112 with
devices ( Bluetooth headphone or speaker ), and could transmit the audio from TV to the devices.
Notes:
* Pls test the TV with wired headphone or check the TV’s audio settings (Select 3.5mm output ) to make sure the
devices connect in the right way and play audio from the TV.
* Pls connect the TV and SPDIF IN port with fibre optic cable when select the TOSLINK connection mode.
To Next Page
Loading...
Need help?
General