11
FM MODE
Switching to FM Mode
1. While enjoying a DAB program, press MODE to FM Mode.
Note: For initial use, it will start at the beginning of the FM frequency range
(87.50MHz). Otherwise, the last FM station you were listening to should be selected.
Manually Scan
While frequency is showing up, press
or or
turn the SCROLL/SELECT
knob to adjust FM frequency 0.05MHz per step.
Auto Scan
While frequency is showing up, three ways to do auto scan:
Press SELECT to conduct ‘Auto Scan’, or
Press and hold
or
to perform this order.
Alternatively, press and hold SCAN to auto scan.
Note: a. the display will show the frequency changing until it stops on the next station.
b. after it reached one end of the frequency range, it will restart auto-scanning.
View Station Information
While playing a program, this order can be reached by repeatedly pressing
INFO on the top of radio.
Doing so, you will obtain info such like ‘RadioText’, ‘Program Type’,
‘Multiplex Name’, ‘Audio Type’ (Stereo/Mono), ‘Time’ and ‘Date’.
Audio Setting
1. Press MENU, it will say ‘Audio setting’.
2. Press SELECT to confirm, you will find two options (the default option is
‘Stereo allowed’).
3. Press
or
to browse, you will find ‘Stereo allowed’ and ‘Forced mono’,
press SELECT to confirm your espected one, it is done.
Setting Station Presets (ALL MODE)
Your radio can store 12 DAB and 12 FM station presets.
To store the current station:
Press and hold one of PRESET buttons1-12 until it says ‘Preset # store’, the
corresponding preset number should be stored.
Selecting a Preset Station (ALL MODE)
To select a stored station:
Press MODE to convert into relative mode, and then press one of PRESET
buttons1-12 to recall.
To Next Page
Loading...
Need help?
General
