Bypass
The BP50 presets can be bypassed for a clean, unprocessed bass tone. To bypass the BP50,
press both footswitches simultaneously. The display reads By indicating the preset is
bypassed. Press either footswitch to exit Bypass and return the the last selected preset.
Editing/Creating Presets
The BP50 lets you create your own presets, or fine tune existing presets to suit your needs.
When creating or editing a sound, you must start with a User or Factory Preset. It is not
possible to start with an empty preset. You can save your preset to any User Preset location
while storing the preset (see Storing a Preset pg 12).
To edit or create a Preset:
1. Press the FOOTSWITCHES to select a preset
2. Press the EDIT buttons in conjunction with the Effect LEDs to choose the effect you want
to edit.
3. Press the VALUE Buttons to change the parameter values.
10
To Next Page
Loading...
Need help?
General
